MAIN PARTS
- Machine frame: 01 set
- Welding torch and center pulling rod system: 02 sets.
- Flux recovery system: 02 sets
- Welding source: 4 sets Megmeet Artsen CM500R
- Control system: 01 control cabinet, 01 control handle.
- Hose and cable system
GENERAL INTRODUCTION
OUTSTANDING FEATURES
- HN0630-S2 applies independent 2-wires arc welding technology which is researched by BRUCO for better quality and higher speed of welding. When welding thin beams (K≤10), the machine can weld A, K and curved beam with the smallest radius 3000mm and the maximum angle 25˚
- Good welding quality and high welding speed.
- HN0630-S2 uses laser sensor with 0.05mm of accuracy to detect the welding line automatically.
- HN0630-S2 is equipped with intelligent welding controller with touch screen, programmable, able to manage information, store data, connect Ethernet, report error.
- The machine is pre-installed with an optimal set of welding parameters to support the operation process and minimize errors when setting parameters by operators.
- HN0630-S2 has a monitoring user funtion to help evaluate performance. It can be a timekeeping, report the machine condition, actual welding time and time when turn on the machine but not welding …
Reviews
There are no reviews yet.