Tiếng Việt
No products in the cart.
- Production technology and quality management according to the standards of Nisshinbo – Japan.
- Servo motor generates punching force for fast speed, can reach 1500 times/min.
- Turntable punching station, made of hardened alloy steel, precision machined.
- Thick punching plate, suitable for common punches and dies, servo motor control, precise positioning, flexible operation.
- The punching station integrated with the Auto-index head allows punching to form many complex details.
- Exclusive Auto-index punching control technology, for high positioning accuracy.
- The workpiece moving system consists of two CNC X and Y axes driven by a servo motor through a ball screw.
- Powerful control function with 840D CNC control system from Seimens-Germany.
- Touch screen HMI 17inches, easy to operate.
- Precise head down control, maximum error only ±0.01.
- Equipped with probe sensor and workpiece clamp sensor.
- Energy saving, low operating cost, low noise, simple maintenance.
- Integrating the world’s leading Sigmanest billet stacking software, maximizing material savings.
- New industrial design with simple style, beautiful appearance and generous appearance
- Better parameter ratio, better core configuration, stable performance and convenient operation
- High-rigidity frame, automatic control of mechanical deflection of workbench for precise bending
- Yawei’s high-quality hydraulic press is a line of high-quality hydraulic presses with modern features and European design style.
- DA53T CNC controller from Delem Netherlands.
- Advanced hydraulic system Hawe – Germany, oil pump of Voith/Eckerle (110T) – Germany, improve stability, trust the hydraulic system.
- The main motor is a servo motor to help increase speed, limit noise, save power, minimize oil leakage errors on the hydraulic system, limit the increase of oil temperature when working to help maintain regime stability.
- The working table is equipped with a CNC-controlled hydraulic compensation system, limiting the sagging state when the product coupling is long.
- As standard, there are 2 CNC axes (X, R) which are powered by AC servo motors, which are switched by high precision speed conversion shaft.
- Safety for everyone is thanks to the safety door on both sides and back of the machine.
- Many upgrade options, well combined with robots.
- Yawei’s most advanced trauma machine series with many modern features, high accuracy and speed of injury.
- Delem DA53T controller – Netherlands, 2D programming display and setup. Hydraulic system Rexroth or Hawe – Germany, oil pump brand Rexroth or Voith/Eckerle – Germany.
- The main motor is a servo motor to help increase speed, limit noise, save power, minimize oil leakage errors on the hydraulic system, limit the increase of oil temperature when working to help maintain regime stability.
- The working table is equipped with an automatic mechanical control compensation table by CNC to thoroughly solve the display of hammock products.
- After standard, there are 2 CNC axes (X, R), driven by AC servo motor, moving by ball motor.
- Equipped with a convenient quick-change tool connection system that removes tools directly at each position with ease.
- The moving frame system on the slide helps to adjust the distance to zoom out easily and quickly.
- Effectively combined with robots, many advanced options according to customer requirements.
- Mortar: 42 CrMo
- Main engine: Siemens Beide
- Electrical parts: Schneider/Siemens
- Hydraulic valve: Taifeng
- Hydraulic pump: Sunny/Hytek
- Gasket: NOK/Valqua
- Helix screw: ABBA/Hiwin
- The ZJKH planer machine features a frame structure design for its base and beam.
- The worktable is made of 60mm Q345 alloy steel while the frame is made of Q235 steel plate, providing good overall stiffness and durability.
- The machine’s worktable is stress-relieved to eliminate residual stress and reduce equipment deformation.
- The ZJKH groove-making machine uses four cutting blades to process “V” grooves, distributing the cutting load evenly and minimizing workpiece deformation.
- Additionally, the machine is equipped with 16 hydraulic clamp positions for better workpiece positioning
- The equipment is designed with frame structure, high strength bolt connection, good overall rigidity and small deformation.
- The outstanding advantages of the machine are heavy load, high speed and high efficiency.
- The machine is made of carbon tool steel and the hardness is above HRC55 after quenching, so the wear of the table is very small, helping to prolong the life of the device.
- Using 5.6KW high-speed, high-power servo motor. The machine is equipped with 4 cutting tools at the same time. The maximum cutting depth is 1mm, 3 times the efficiency of traditional equipment.
- The W11 mechanical 3-roll plate bending machine is a classic, sturdy, low-investment machine with simple operation, wide adaptability to various working conditions, and convenient and easy maintenance. The machine has a 3-axis synchronized structure, with the upper roller moving vertically between the 2 lower rollers by the drive of a screw, bolts, and guiding screws.
- The W11 3-axis mechanical plate bending machine has 3 symmetrically arranged axes, with the upper axis located at the center of the 2 lower axes. A shaft and gear on the same screw shaft and a secondary transmission set of screw shafts are used to drive the vertical movement of the moving axes.
- The upper gear of the main reduction gearset is used to drive the gears of both lower axes to rotate and provide torque to the metal plate. The metal plate is placed between the 3 working axes (2 lower and 1 upper axis) and continuously bent under the pressure of the upper axis and the rotation of the lower axis to create a permanent elastic deformation on the plate, allowing the plate to be rolled into the desired shape such as a cylinder, cone or arch.
- A disadvantage of the symmetrical mechanical 3-roll plate bending machine is that the end of the plate cannot be pre-bent.
- Kruman KPR3Y 3-axis hydraulic sheet metal rolling machine (without edge bending) – A suitable device for processing steel plates and galvanized sheets.
- The machine has a sturdy structure and is easy to operate.
- The upper axis is lifted and rotated by a hydraulic guide, while the two lower roller axes are guided by motors.
- The W11Y model of the 3-axis hydraulic sheet metal rolling machine does not include edge bending and has a symmetrical structure with three rollers.
- The upper roller is moved up and down vertically at the center position of the two lower rollers. Hydraulic oil is applied to the piston via a hydraulic cylinder, and the hydraulic lifting process is carried out.
- The two lower rollers are rotated, and the output gear of the reduction gearbox is meshed with the teeth of the lower rollers to provide torque to the rolled plate
- This is an asymmetrical mechanical sheet metal rolling machine that works by pressing the top roller and connecting the upper and lower rollers together.
- The two lower rollers are driven, and the direction of rotation of the roller shaft is changed by the main motor.
- The machine consists of one top roller, two bottom rollers, a screw shaft, a wheel, and some auxiliary parts.
- The lifting motion of the roller is achieved by moving the lifting screw up and down.
- The machine has high durability, stability, and strength.
- It has low investment cost, simple operation, adapts well to various working conditions, and is easy to maintain.
- The sheet metal bending machine with edge bending function.
- It can bend the sheet metal into cylindrical, curved, and conical shapes under normal temperature conditions.
- The upper shaft of the machine can move up-down and left-right.
- Controlled by an easy-to-use PLC system for the operator, it helps to increase production efficiency and reduce product costs.
- Straight line slitter, new design, modern industrial design.
- Easily adjust the knife clearance and cutting angle, improving the cutting quality.
- Hydraulic system components are imported from Germany, limiting errors in operation.
- The machine is equipped with the Dutch ESTUN E21S controller for flexible transport work and easy operation.
- With HGSK machine, the machine is equipped with Dutch Delem DAC360S controller with high accuracy, simple operation.
- The machine cutter is high-grade alloy, long life, effective cutting for a long time.
- The build is solid, my computer’s chassis is hardware and eliminates redundancy.
- The equipment is designed with frame structure, high strength bolt connection, good overall rigidity and small deformation.
- The outstanding advantages of the machine are heavy load, high speed and high efficiency.
- The machine is made of carbon tool steel and the hardness is above HRC55 after quenching, so the wear of the table is very small, helping to prolong the life of the device.
- Using 5.6KW high-speed, high-power servo motor. The machine is equipped with 4 cutting tools at the same time. The maximum cutting depth is 1mm, 3 times the efficiency of traditional equipment.
- ZJKH machine base and beam are designed with frame structure. The working table is made of 60mm Q345 alloy steel. The frame is made of Q235 steel plate. The machine has good overall rigidity and durability.
- The table is annealed to eliminate residual stress and reduce equipment deformation.
- ZJKH grooving machine uses four cutters to process “V” grooves, so the cutting amount is evenly distributed and the workpiece deformation is minimized.
- The machine is equipped with 16 hydraulic clamp positions to help clamp the product positioning better.