Tiếng Việt
- The W11 mechanical 3-roll plate bending machine is a classic, sturdy, low-investment machine with simple operation, wide adaptability to various working conditions, and convenient and easy maintenance. The machine has a 3-axis synchronized structure, with the upper roller moving vertically between the 2 lower rollers by the drive of a screw, bolts, and guiding screws.
- The W11 3-axis mechanical plate bending machine has 3 symmetrically arranged axes, with the upper axis located at the center of the 2 lower axes. A shaft and gear on the same screw shaft and a secondary transmission set of screw shafts are used to drive the vertical movement of the moving axes.
- The upper gear of the main reduction gearset is used to drive the gears of both lower axes to rotate and provide torque to the metal plate. The metal plate is placed between the 3 working axes (2 lower and 1 upper axis) and continuously bent under the pressure of the upper axis and the rotation of the lower axis to create a permanent elastic deformation on the plate, allowing the plate to be rolled into the desired shape such as a cylinder, cone or arch.
- A disadvantage of the symmetrical mechanical 3-roll plate bending machine is that the end of the plate cannot be pre-bent.
- Kruman KPR3Y 3-axis hydraulic sheet metal rolling machine (without edge bending) – A suitable device for processing steel plates and galvanized sheets.
- The machine has a sturdy structure and is easy to operate.
- The upper axis is lifted and rotated by a hydraulic guide, while the two lower roller axes are guided by motors.
- The W11Y model of the 3-axis hydraulic sheet metal rolling machine does not include edge bending and has a symmetrical structure with three rollers.
- The upper roller is moved up and down vertically at the center position of the two lower rollers. Hydraulic oil is applied to the piston via a hydraulic cylinder, and the hydraulic lifting process is carried out.
- The two lower rollers are rotated, and the output gear of the reduction gearbox is meshed with the teeth of the lower rollers to provide torque to the rolled plate
- This is an asymmetrical mechanical sheet metal rolling machine that works by pressing the top roller and connecting the upper and lower rollers together.
- The two lower rollers are driven, and the direction of rotation of the roller shaft is changed by the main motor.
- The machine consists of one top roller, two bottom rollers, a screw shaft, a wheel, and some auxiliary parts.
- The lifting motion of the roller is achieved by moving the lifting screw up and down.
- The machine has high durability, stability, and strength.
- It has low investment cost, simple operation, adapts well to various working conditions, and is easy to maintain.
- The sheet metal bending machine with edge bending function.
- It can bend the sheet metal into cylindrical, curved, and conical shapes under normal temperature conditions.
- The upper shaft of the machine can move up-down and left-right.
- Controlled by an easy-to-use PLC system for the operator, it helps to increase production efficiency and reduce product costs.