Tiếng Việt
DETAILED CONFIGURATION
- Equipment Image:
Image of cutting path on CNC Fiber Laser Cutting Machine
Technical Specifications:
| No | Model |
20KW | Unit | |
| 1 | Max Acceleration for X&Y Axis | 1.2 | G | |
| 2 | Maximum No-Load Speed | 100 | m/min | |
| 3 | Working Range | 26000×3500 | mm | |
| 4 | Number of Working Tables | 01 | piece | |
|
5 |
X Axis | Travel | 3550 | mm |
| Positioning Accuracy | ±0.03mm/m | mm | ||
| Re-positioning Accuracy | ±0,05mm | mm | ||
|
6 | Y Axis
| Travel | 26100 | mm |
| Positioning Accuracy | ±0.03mm/m | mm | ||
| Re-positioning Accuracy | ±0,05mm | mm | ||
|
7 | Z Axis
| Travel | 160 | mm |
| Z-Axis Height Control | Điều khiển Servo | |||
| 8 | Power | 20.000 | W | |
| 9 | Wavelength | 1070 -1080 | nm | |
| 10 | Fiber Diameter | ≥ 50 | µm | |
| 11 | Transmission Method | Sợi quang (fiber) | ||
| 12 | Max Cutting Thickness | Black Steel (Q235, Q345) | 70 | mm |
| 14 | Effective Cutting Thickness | Black Steel (Q235, Q345) | 35 | mm |
| 16 | Power Supply | 380 | V | |
| 17 | Phase | 3 | Phase | |
| 18 | Frequency | 50 | Hz | |
| 19 | Total Machine Weight | 310000 | Kg | |
| 20 | Length | 32008 | mm | |
| 21 | Width | 5755 | mm | |
| 22 | Hight | 2000 | mm | |
BRUCO 20KW FIBER LASER CUTTING MACHINE
(0 customer reviews)Customers comment on the product
Related products
- Quick response to control, saving gas, electricity and cost
- Using bright surface cutting technology, fast cutting speed, small slope, low roughness
- Gantry double-drive high-rigidity bed structure, annealing and stress-relieving operation to sensure efficient and stable running
- Humanized operation interface and cutting parameter library are fully upgraded
– Perfect combination of production efficiency and performance
– High-speed cutting of thin plates, precise and perfect piercing of medium and thick plates
– Intelligent operation interface for equipment status monitoring and comprehensive upgrade of cutting expert parameter library
– Nano-level interpolation, independent CNC control technology, to ensure extremely fast response of each axis
- Latest design, high performance, world standard high speed laser cutting machine version.
- Safe operation, clean environment meets European standards.
- Mechanical structure, strict production standards. X-axis machined by alloy steel for high travel speed and withstand large torque and acceleration.
- The control system, driver, and Siemens synchronous motor provide precise control, anti-interference and high stability.
- Inheriting the perfect development of HLF features for the best cutting quality and punching ability.
- Equipped with the latest technology and features for easy fault diagnosis, maintenance and operation.
- Easy integration of 4.0 smart factory solutions.
- Combined with the world’s number one Sigmanest nesting software for optimal cutting, efficient material management.
- Machine frame: 01 set
- Welding torch and center pulling rod system: 02 sets.
- Welding guide device: 02 sets
- Flux recovery system: 02 sets.
- Welding source: 4 sets Megmeet Artsen CM500R and 2 sets Jasic MZ1000.
- Control system: 01 control cabinet, 01 control handle.
- Hose and cable system
- The design promotes efficiency, economy, reasonable and optimal machine structure.
- Gate structure with two parallel moving rails, two switching workbenches improves productivity, high speed with 2.1G acceleration.
- Fiber laser transmission, no mirror system, so the cost of operation and maintenance is very low, working reliably and stably.
- The chamber protects the main cutting table area, limiting smoke and dust.
- The sight glass is anti-laser and provides high safety for operators.
- Imported components, long life and stability: Beckhoff controller – Germany, IPG laser source, Raytools cutting head – Switzerland…
- Combined with the world’s number one Sigmanest nesting software for optimal cutting, efficient material management.
- Single desk
Metal sheet cutting, metal pipe not available
1.5kw / 2kw / 3kw / 4kw available
Model: BLC3000
Ray 3.15 x10m (15Kg/m), 1 steam CNC + 1 CNC Plasma (on the same mine lifter), with Sigmanest Companion software, Huayuan HYCC-M3 CNC control system.
Model: BLC4000
Ray 4 x14m (15Kg/m), 1 mỏ CNC hơi+1 CNC plasma (trên cùng một bộ nâng hạ mỏ), kèm phần mềm Sigmanest Companion, hệ thống điều khiển CNC Huayuan HYCC-M3.
VIEWED PRODUCTS
You have not viewed any product yet!
Reviews
There are no reviews yet.