H-FRAME MECHANICAL PRESS SINGLE CRANKSHAFT - ST1
H-FRAME MECHANICAL PRESS SINGLE CRANKSHAFT - ST1
The ST1 series single crank H-frame mechanical press can be widely used in the manufacturing process, including stamping, bending, punching, etc. Moreover, it can also apply single or continuous stamping modes. The ST1 series is also equipped with a high-performance wet clutch, which is an energy-efficient and environmentally friendly product with high torque and low wear.
Main Features
H-frame mechanical press with single crankshaft ST1 series can be widely used in the production process, including stamping, bending, punching... Moreover, it can also apply single or continuous stamping mode.
This ST1 series is also equipped with a high-performance wet clutch, which is also a green energy and environmentally friendly product, with high torque and low wear.
Outstanding features of the H-frame mechanical press with single crankshaft ST1 series
- Ultra-rigid steel frame press machine.
- Hydraulic overload protector.
- Minimize frame bending.
- Wet type clutch & brake with high torque transmission.
- The H-frame mechanical press with single crankshaft ST1 series features six-point, extended, precise clamps.
- Convenient for installing the lower die pushing system.
Technical specifications of the H-frame mechanical press with single crankshaft - ST1
| Product | ST1-80 | ST1-110 | ST1-160 | ||||||
| S | h | L | S | h | L | S | h | L | |
| Capacity-ton | 80 | 110 | 160 | ||||||
| Rated load point-mm | 5 | 3.2 | 5 | 5 | 3.2 | 5 | 6 | 4 | 6 |
| Stroke length-mm | 100 | 60 | 150 | 110 | 70 | 180 | 130 | 80 | 200 |
| Strokes per minute-Fixed speed--SPM | 80 | 100 | 60 | 70 | 90 | 50 | 60 | 80 | 45 |
| Strokes per minute-Variable speed--SPM | 50-100 | 65-140 | 40-75 | 45-90 | 60-130 | 30-65 | 35-70 | 50-100 | 20-50 |
| Die height (SDAU)-mm | 355 | 375 | 330 | 385 | 405 | 350 | 435 | 460 | 400 |
| Cushion area (LR x FB)-mm | 780x600 (A) | 950x600 (B) | -- | 900x680 (A) | 1050x680 (B) | -- | 1000x760 (A) | 1200x760 (B) | -- |
| Slide area (LR x FB)-mm | 560x460 | 650x520 | 700x580 | ||||||
| Product | ST1-200 | ST1-260 | ST1-300 | ||||||
| S | h | L | S | h | L | S | XL | -- | |
| Capacity-ton | 200 | 260 | 300 | ||||||
| Rated load point-mm | 6 | 4 | 6 | 6 | 4 | 6 | 6 | 6 | -- |
| Stroke length-mm | 150 | 100 | 200 | 180 | 100 | 250 | 180 | 300 | -- |
| Strokes per minute-Fixed speed--SPM | 50 | 65 | 35 | 45 | 55 | 30 | 45 | 30 | -- |
| Strokes per minute-Variable speed--SPM | 35-70 | 45-95 | 20-50 | 30-60 | 35-75 | 20-40 | 30-50 | 20-35 | -- |
| Die height (SDAU)-mm | 475 | 500 | 450 | 485 | 525 | 450 | 610 | 550 | -- |
| Cushion area (LR x FB)-mm | 1150x820 (B) | 1300x820 (B) | -- | 1300x840 (A) | 1400x840 (B) | -- | 1300x840 (A) | 1400x840 (B) | -- |
| Slide area (LR x FB)-mm | 850x650 | 920x700 | 920x700 | ||||||
Weldcom is the official distributor of H-frame mechanical press with single crankshaft ST1 series as well as equipment involved in the sheet metal processing process in Vietnam. All products are guaranteed to be genuine, with high precision, and nationwide after-sales service.
Contact Weldcom immediately to receive a detailed quotation for the H-frame mechanical press with single crankshaft ST1 series and get the most suitable in-depth technical advice for your company's production needs.
Hỗ trợ tư vấn
Please contact us!