1. Rigid and stable machine structure

• The frame of the Yawei HLF 2060 Fiber Laser Cutting Machine is heat-treated to reduce residual stress and maintain stability during long-term operation.
• The aluminum alloy beam has high rigidity and lightweight, meeting large acceleration requirements.
• The large cross-section Y-axis frame is optimized by finite element analysis; the rack and guide are protected within a closed structure.

2. Siemens drive and CNC system

• Alpha – Germany gearbox, gear, and rack.
• Siemens SINUMERIK 840D sl control system, SINAMICS S120 drive, DRIVE-CLiQ communication, and high-torque AC Servo.
• The Z-axis uses NSK ball screw combined with THK – Japan linear guide, ensuring fast and precise movement.

3. Precitec ProCutter head – Germany

• The Precitec cutting head integrates sensors, focusing lenses, and a synchronous focusing system.
• Real-time monitoring of temperature, pressure, cutting head status, and energy usage.
• CNC Machine integrates an anti-collision mechanism to protect the cutting head during processing.

4. IPG laser source

• Operating efficiency over 32%, good beam quality, small focal point, and high power density.
• No laser gas consumption, reducing optical system maintenance requirements.
• Integrated fiber detection and sensor protection functions.

5. Automatic hydraulic lifting exchange table

• CNC Laser Cutting Machine is standardly equipped with two worktables, synchronously controlled by four hydraulic cylinders.
• Exchange cycle ≤ 25 seconds, cutting efficiency 2 times higher than a single worktable.
• Siemens control combined with high-precision encoder; the cutting surface always maintains the same height, Z-axis travel about 100–120 mm.
• Optional sheet lifting balls help reduce surface scratches.

6. Automatic sheet detection and positioning

• Automatically detects three points to determine the actual position when the sheet is misaligned.
• The system automatically recalculates the angle and cutting coordinates.
• Automatically stops and alerts when there is no material on the table.

7. Automatic cutting process control

• Automatically adjusts laser power according to speed, especially at corners, small details, and complex profiles.
• Automatically selects gas type, pressure, and flow according to material and thickness.
• Automatically cuts off gas when the machine stops.
• Automatically cleans the cutting nozzle and calibrates 16 points, supporting warped sheet processing.

8. Assist gas control

• 3-stage compressed air filtration system Parker, filtration precision up to 0.003 PPM.
• Specialized gas valves and fast-response solenoid valves.
• When the difference between set pressure and actual pressure exceeds 10%, the machine automatically alerts.
• If gas is not supplied, the system stops before laser emission to protect the cutting head.

9. Dust extraction and waste collection system

• Dual-channel dust extraction design combined with intelligent suction doors focusing suction force at the cutting area.
• Equipped with a waste collection tray with rollers.
• Optional dust extraction system Haobo or Donaldson.

10. HMI and production data management

• Siemens HMI PC supports simulation, parameter editing and saving, maintenance, and fault diagnosis.
• Supports production planning, records the number of sheets, time, and processing parameters by day.
• Exports production data within 1 month for management and statistics.

11. Exchange table control before delivery

• Synchronization error under full load: below 3 mm.
• Synchronization error without load: below 5 mm.

12. Optional modules

• Post-cutting sheet conveyor: automatically discharges sheets/waste, enhancing material handling efficiency.
• Enclosed cover: increases safety, reduces laser radiation impact, and synchronizes with the overall machine design.

See more: CNC Plasma Cutting Machine Price

Outstanding advantages of Yawei HLF 2060 Fiber Laser Cutting Machine

1. Fast cutting, maintaining accuracy

Rigid structure, lightweight aluminum alloy beam, Siemens drive system, and Precitec cutting head help the machine maintain accuracy at high speeds, even with complex profiles.

2. Cutting efficiency 2 times higher than a single table

Two worktables operate alternately, exchange cycle ≤ 25 seconds, allowing parallel sheet loading/unloading with the cutting process, achieving cutting efficiency 2 times higher than a single worktable.

3. High automation, reducing manual operations

From sheet position detection, power adjustment, gas change, pressure control to nozzle cleaning and 16-point calibration are all automated, shortening setup time and reducing operational errors.

4. Cutting head protection and increased stability

Anti-collision system, cutting head status monitoring, pressure alerts, and gas checks before laser emission help limit incidents and reduce the risk of cutting head damage.

5. Energy and gas consumption savings

IPG source with efficiency over 32%, no laser gas usage; automatic adjustment and gas cut-off system optimize gas consumption during production.

6. Effective dust extraction, cleaner operating environment

Dual-channel dust extraction design and intelligent suction doors focus suction directly at the processing area, enhancing smoke and waste collection capability.

7. Production management by data

Siemens HMI supports monitoring production output, processing time, operating parameters, and production planning; data is stored and exported for management and performance evaluation.

Refer to CNC pipe cutting machine: HERE

Technical specifications of Yawei HLF 2060 Fiber Laser Cutting Machine

Customers interested in the Yawei HLF 2060 Fiber Laser Cutting Machine please contact Weldcom via hotline or leave information so we can provide detailed support.